Interrupt Print; Securing Time - Canon Color imageRUNNER LBP5975 User Manual

5

INTERRUPT PRINT

SECURING TIME

5-26 SETUP Menu Settings
Secured print (See p. 5-110)
•
Encrypted secured print (See p. 5-109)
•
RIP Once (See p. 5-27)
•
Spooler (See p. 5-63)
•
SMB printing (See p. 5-61)
•
Using SSL for communication by the Remote UI (See p. 5-63)
•
E-mail print (See p. 5-64)
•
Printing the PDF file using the direct print function (See p. 2-12)
•
Usually, leave the setting to ON. Specify OFF only when an error has occurred in
a function that uses the hard disk.
IMPORTANT
Initialize the SETUP menu after installing the optional hard disk, and then cycle the
•
power of the printer or perform a hard reset. After initializing the SETUP menu, the
functions of the hard disk become effective by cycling the power of the printer or
performing a hard reset.
After changing the settings for this item, cycle the power of the printer or perform a
•
hard reset to make the settings effective.
NOTE
This item is displayed only when an optional hard disk is installed.
ON*, OFF
Specifies whether to use the interrupt print function.
When HARD DISK is set to OFF, the setting for this item is ignored, and the
interrupt print is disabled.
NOTE
This item is displayed only when an optional hard disk is installed, and HARD DISK
is set to ON.
1 hour*, 2 hours, 3 hours, 6 hours, 12 hours, 24 hours
On the computer, previously specify the time to delete data of "secured print" in
which the file name, user name, and password are specified.
Secured print data is saved on the hard disk, and normally, the data cannot be
deleted unless it is printed. However, the data is automatically deleted even if it
has not been printed when the time specified in this item has elapsed.