AUTO SWITCH
PCL................ ON*, OFF
1
PS*
............... ON*, OFF
IMAGING ....... ON*, OFF
2
PDF1.5*
........ ON*, OFF
1
*
PS is displayed only when the optional PS ROM or PS/Barcode ROM is installed.
2
*
PDF1.5 is displayed when all the following optional accessories are installed.
- Hard Disk
- PS ROM or PS/Barcode ROM
- RAM (ER-256A, ER-512A)
Specifies the print mode to be automatically switched to if the auto-switch mode is
specified.
If ON is specified, the mode is to be automatically switched to.
NOTE
Specify the auto-switch print mode in MODE SELECTION (See p. 5-65).
•
If no mode is specified as the mode to be automatically switched to in this item, and
•
if the auto-switch mode is specified, the printer operates in the mode specified in
MODE PRIORITY (See p. 5-67).
MODE PRIORITY
NONE*, PCL, PS*
1
*
PS is displayed only when the optional PS ROM or PS/Barcode ROM is installed.
2
*
PDF1.5 is displayed when all the following optional accessories are installed.
- Hard Disk
- PS ROM or PS/Barcode ROM
- RAM (ER-256A, ER-512A)
Specifies "Mode Priority" to be switched to by priority for when the auto-switch
mode is specified and this printer cannot identify the control command of the data.
If NONE is specified, the printer does not specify "Mode Priority". If the printer
cannot identify the control command of the data, it determines the print mode
automatically.
1
2
, PDF1.5*
SETUP Menu Settings
5
5-67