3
Utility
Settings
OK
4
7
7-102
When Any Print Defect Appears
Select TEST CHART 2 using [
TEST CHART 2
EXECUTING
TEST CHART 2
Test Chart 2 is printed.
Check if any flaws, unevenness, or streaks appear on the
printed Test Chart 2.
- When problems (flaws, uneven prints, streaks) do not appear on the printed
paper
If there is no print defect (flaws, uneven print, or streaks) appearing on Test Chart 2,
there is a possibility that some problem has occurred in the printer. Contact your local
authorized Canon dealer.
- When problems (flaws, uneven prints, streaks) appear on the printed paper
Streak
Streak
Uneven print
Uneven print
If there are any print defects (flaws, uneven print, or streaks) appearing on Test Chart 2,
replace the fixing unit. For details on the procedure for replacing the fixing unit, see
"Replacing the Fixing Unit," on p. 6-45. If the print defect problem is not solved even
after replacing the fixing unit, contact your local authorized Canon dealer.
] and [ ], then press [OK].
→
(Approx. 1 sec.)
→
Flaw
Flaw