When Using A Hard Disk (Only When A Hard Disk Is Installed) - Canon Color imageRUNNER LBP5975 User Manual

Hide thumbs Also See for Color imageRUNNER LBP5975:
Table of Contents

Advertisement

2
Press "
" of the power switch on the printer.

When Using a Hard Disk (Only When a Hard Disk Is Installed)

When using the optional hard disk, turn the printer OFF using the following
procedure.
IMPORTANT
If you perform a shutdown when any job of which you stopped the operation or of
secured print is in the hard disk, the message <CANNOT EXECUTE> is displayed.
If you want to execute a shutdown, perform a soft reset to delete the job, and then
perform a shutdown again.
If you do not want to execute a shutdown, press [Online].
Once you perform a shutdown, you cannot cancel the operation in midstream. When you
want to turn the printer ON again, turn the printer OFF once following the instruction of
the message, and then turn the printer ON.
NOTE
You can also perform SHUT DOWN in the RESET menu by pressing [Reset] on the
control panel. (See "SHUT DOWN," on p. 5-115)
1
Make sure that the Job indicator and HDD indicator are off.
Cancel Job
Online
Feeder Selection
Utility
Ready
Message
HDD
Job
Off
Turning the Printer ON/OFF
Job
Power
Settings
OK
Main Power
Reset
2
2-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Color imagerunner lbp5970

Table of Contents