Gradation Set - Canon Color imageRUNNER LBP5975 User Manual

■ GAMMA

GRADATION SET.

5
5-52 SETUP Menu Settings
TEXT .................................... 1.4*, 1.8, 2.2, 1.0
GRAPHICS .......................... 1.4*, 1.8, 2.2, 1.0
IMAGE.................................. 1.4*, 1.8, 2.2, 1.0
Adjusts the brightness of the printout results without spoiling the lightest parts and
darkest parts of the data. Apply this option when printed colors in the printed
paper are lighter than those in the original image (such as photographs that have
not yet been scanned or graphics created on the monitor) or when you want to
change the brightness of colors. The greater the setting value is, the darker in
color the data is printed. 1.4 is the value without correction.
You can specify the settings by data type of TEXT, GRAPHICS, and IMAGE.
NOTE
Set CMS/GAMMA (See p. 5-49) to CMS to enable this item.
GRADATION ........................ OFF*, SMOOTH 1, SMOOTH 2
1
GRAPHICS* ....................... ON*, OFF
1
IMAGE* ............................... ON*, OFF
1
* Displayed only when GRADATION is set to SMOOTH 1 or SMOOTH 2.
Specify this item if gradation of image data such as graphics (illustrations created
by an application) or images (bitmap data) cannot be printed smoothly (if the color
changes stand out).
SMOOTH 2 performs a smoother gradation than SMOOTH 1. If gradation is not
printed smoothly by specifying SMOOTH 1, specify SMOOTH 2.
You can also select a target for the smoothing process by switching ON/OFF for
GRAPHICS and IMAGE.
IMPORTANT
If COLOR HALFTONES or B & W HALFTONES is set to ERR DIFFUSION, the
setting for this item is disabled.
NOTE
The smoothing process can be specified only for graphics data in the printer driver.
For image data, the smoothing process can be specified only from the printer's
control panel.