Plain Paper; Update Firmware; Sp.print Mode - Canon Color imageRUNNER LBP5975 User Manual

SP.PRINT MODE

■ PLAIN PAPER

■ COATED PAPER
5

UPDATE FIRMWARE

■ USB
■ NETWORK
5-74 SETUP Menu Settings
OFF*, MODE 1, MODE 2, MODE 3
When printing plain paper, the paper may curl or the toner does not fix well. In this
case, specify the setting for this item.
OFF: Does not apply Special Print Mode.
•
MODE 1: Specify when the printing speed drops on printing plain paper
•
of 11.00 in. (279.4 mm) wide (Letter size) or less
continuously.
MODE 2: Specify when the toner does not fix well by specifying OFF.
•
MODE 3: Specify when the toner still does not fix well by specifying
•
MODE 2.
OFF*, ON
Specify the setting for this item according to the type of the coated paper to be
used.
OFF: Specify when printing coated paper of 28.0 lb Bond to 62.5 lb Cover (106
•
2
to 169 g/m ).
ON: Specify when printing coated paper of 62.6 to 81.4 lb Cover (170 to 220 g/m
•
-
This item is to be executed only when the firmware of the printer needs to be
updated.
-
This item is to be executed only when the firmware of the printer needs to be
updated.
2
).