■ When printing from DOS or UNIX
When you are printing from DOS, UNIX, or other operating system on which you cannot
use the printer driver, set MANUAL 2-SIDED to 2ND SIDE from the control panel.
Specify the settings for printing the other side of previously printed paper from the printer's
control panel using the following procedure.
Settings
1
3
2
Utility
Settings
OK
3
Utility
Settings
OK
Utility
4
Settings
OK
3-66
2-sided Printing
Press [Settings].
SETUP
CONTROL MENU
Select FEEDER MENU using [
FEEDER MENU
TRAY PAPER SIZE→
Select MANUAL 2-SIDED using [
MANUAL 2-SIDED →
=1ST SIDE
Select 2ND SIDE using [
2ND SIDE
=2ND SIDE
"=" is displayed on the left of 2ND SIDE, and the settings for printing the other side
of previously printed paper are specified.
→
] and [ ], then press [OK].
→
] and [ ], then press [OK].
→
] and [ ], then press [OK].
→
→