Inserting The 3C359 Nic - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

Inserting the 3C359 NIC

Follow these steps to insert the 3C359 NIC:
1 Remove the computer's cover and select a PCI
expansion slot that supports bus mastering.
You can install the 3C359 NIC in either a standard bus
master 32-bit slot, as shown in Figure 2-1, or a newer bus
master 64-bit slot. If both slot types are available in your
PC, place the NIC in the 32-bit slot.
Figure 2-1 Removing the Expansion Slot Cover
Verify that the selected slot is a PCI bus master slot by
consulting your computer documentation, manufacturer,
or vendor.
2 Unfasten and remove the expansion slot cover
(Figure 2-1) from the selected bus master PCI slot.
Store the expansion slot cover for future use, but retain the
mounting screw for securing the NIC.
Mounting screw
Expansion slot cover
32-bit PCI
slots
ISA/EISA
slots
Inserting the 3C359 NIC 2-3