3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual page 94

6-4 C 6: T
HAPTER
Figure 6-2 Test Menu
2 From the Test pull-down menu shown in Figure 6-2,
select Run Tests.
The Run Tests dialog box appears, similar to the one shown
in Figure 6-3.
Figure 6-3 DOS Diagnostic Program Run Tests Dialog Box
3 Press Enter to start the tests.
Each test runs once unless you specify otherwise. The test
results are displayed with "Passed" or "Failed" in the
Results column.
ROUBLESHOOTING