3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual page 40

3-10 C 3: N
HAPTER
4 Select Installation from the menu and then Requester
on Workstation.
5 Select a target directory for the Requester files. The
default is C:\NETWARE. Select OK.
A new menu appears with four options:
Edit CONFIG.SYS and Copy All Files (default)
Only Edit CONFIG.SYS
Only Copy Requester Files
Only Copy ODI LAN Driver Files
6 From this menu, select the option Edit CONFIG.SYS
and Copy All Files and then select OK.
A dialog box appears, asking for an ODI LAN driver and
presenting two options:
Do not upgrade the currently installed LAN driver
Choose from the list or type a driver name
7 Enter the driver name for the TokenLink Velocity
XL PCI NIC:
tlnkpodi.sys
8 When prompted, select the default configuration:
IPX Support for DOS or Windows (OFF)
9 Select CONTINUE.
A new menu appears with three optional protocols:
SPX Support for OS/2 Sessions
NetBIOS Emulation for OS/2 Sessions
Remote Named Pipe Support
10 Select the appropriate protocol and save the
configuration.
If no additional protocols are needed, do not select any
of the three options. Bypass this section by choosing Save
the configuration.
A new menu appears, asking if you want to save changes
to the CONFIG.SYS file.
11 Save the file as C:\CONFIG.SYS and click OK
to continue.
A new window appears, confirming that you want all files
copied to C:\NETWARE.
N W E
OVELL ET ARE NVIRONMENTS