Using Class Of Service Advanced Options - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

5 Once the Range Start, Range End, and Protocol are
entered press Add.
The range is added to the list, as shown in Figure 4-14.
c
Figure 4-14 Additional Ranges Window Showing Data
6 Click OK when you are finished.
To remove a range, select the range in the list and
click Remove.
7 Restart the computer.

Using Class of Service Advanced Options

You can use Class of Service Advanced Options to adjust
the network driver's handling of certain types of
Class of Service traffic. The advanced options are set to
certain default values recommended by 3Com. In general,
you do not need to change these values, but you can do so
if you wish. Contact network administration before
changing these options.
Configuring Class of Service 4-25