Configuring Class Of Service - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

Figure 4-10 3Com TokenLink Velocity XL PCI Adapter Dialog Box
6 Click OK.
You can click the Priority button to access the
DynamicAccess: Select Adapter window (Figure 4-11)
to enable and configure Class of Service. For more
information about Class of Service, see "Configuring Class
of Service" later in this chapter.
7 Restart the computer.
Configuring Class of Service
This section describes activating and configuring
DynamicAccess Class of Service (Traffic Prioritization)
support for Windows NT 4.0.
Class of Service is available only with the 3C359 NIC NDIS 4
driver. This feature is not available with other 3C359 NIC
drivers. Although the NDIS 4 miniport driver is compatible
with Windows 95 (version 950b, OSR2), it does not
currently provide Class of Service support for this version of
Windows 95. The NDIS 4 miniport driver does provide
Class of Service support for Windows 98.
Configuring Class of Service 4-19