Inserting The 3C319 Nic - 3Com TokenLink Velocity 3C319 User Manual

3 Remove the 3C319 NIC from its antistatic container.
4 Inspect the 3C319 NIC for visible signs of damage.
If you find a problem, immediately notify your authorized
network supplier and the carrier that delivered the NIC.
Complete the Product Registration Card and return
it to 3Com. Or call 1-800-NET-3Com for immediate
registration.

Inserting the 3C319 NIC

Follow these steps to insert the 3C319 NIC:
1 Insert the 3C319 NIC in an empty ISA or EISA
expansion slot.
Make sure it is completely seated in the slot by pushing
down firmly on both ends of the NIC.
2 Connect one of the following network cable types
to the 3C319 NIC:
CAUTION: Connect the cable only to the 3C319 NIC
that you have just installed. Connecting the cable to
other NICs could cause serious damage to them and
the token ring network.
TokenLink Velocity NICs support industry-standard token
ring Category 3, 4 or 5 UTP or types 1 or 6 STP cabling.
These cables meet IEEE 802.5 specifications.
Do not daisy-chain token ring NICs or connect them
back to back.
Shielded twisted-pair (STP) cable with a
DB-9 connector
Unshielded twisted-pair (UTP) cable with an
RJ-45 connector
Inserting the 3C319 NIC 2-3