Installing A Netware Server Driver; Driver Support - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

3-12 C
HAPTER
Your NET.CFG file should look similar to the following:
LINK DRIVER TLNKPODI
The node address should be set to the UAA or the LAA.
Modify and save the NET.CFG file if the node address and
frame type are not correct.
3 Remove the OS/2 Requester diskette and restart
the PC.
This completes the procedure for installing the OS/2 client
driver for NetWare.

Installing a NetWare Server Driver

This section contains information about installing the
TLNKPODI.LAN NetWare server driver for the 3C359 NIC
in the following environments:
The driver and associated files are located in the
\NETWARE\NWSERVER directory on TokenDisk diskette #1.

Driver Support

The TLNKPODI server driver is a high-performance
NetWare 4.1x-compliant server driver. It can be used in
the following environments:
The term "NetWare 4.1x-compliant" server driver in this file
means that the HSM (hardware-specific module, or server
driver) meets the Open Data-Link Interface (ODI) 3.3
specification. Netware 3.12 servers using ODI 3.3 drivers
need updated files from Novell. If you are installing the
driver in a NetWare 3.12 server, download the LANDR9
and 312PTA.EXE files from Novell's Web site.
3: N N W
OVELL ET ARE
Node Address 00608C112233
Frame Token-Ring MSB
Frame Token-Ring_SNAP MSB
NetWare 3.12
NetWare 4.1x
NetWare 4.1x servers
NetWare 3.12 servers
NetWare servers running SFT III in NetWare 4.1 (as an
IPX link, not as a mirrored server link)
E
NVIRONMENTS