Installing A Driver For Windows 95; About Microsoft Windows 95 Versions - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

Installing a 3C359 NIC Driver for Windows Environments
If your network environment uses the TCP/IP
communications protocol, you must obtain from your
network administrator all the information you will need
to define an IP address during the installation process.

Installing a Driver for Windows 95

This section describes installing the 3C359 NIC NDIS 4 driver
or NDIS 3 driver for the following Microsoft Windows 95
versions:

About Microsoft Windows 95 Versions

The 3C359 NIC NDIS 4 driver installation procedures differ
depending on the Windows 95 version installed on
your PC.
Version 950 of Windows 95 If your PC did not come
with Windows 95 already installed, you must install
version 950 of Windows 95 (950a, or "retail" version)
before you install the driver. Version 950 of Windows 95
is designed to upgrade Windows 3.x PCs.
Version 950b (OSR2) of Windows 95 Some PCs are
sold with a special Windows 95 version already installed.
Windows 95 OEM Service Release 2 (OSR2) is version 950b
of Windows 95. An OEM Service Release is an updated
version of a Microsoft product for PC original equipment
manufacturers (OEMs) to preinstall on new PCs. Windows 95
version 950b contains some new hardware support
and programs.
Finding the Windows 95 Version To determine which
Windows 95 version you are using, open the Control Panel,
select
the General tab. If your release is version 4.00.950 (or
4.00.950a), you are using the "retail" version of Windows 95
(version 950). If your release is version 4.00.950b, you are
using the OSR2 version of Windows 95 (version 950b).
Version 950 (950a, or "retail" version)
Version 950b (OEM Service Release 2, or OSR2)
System , and read the System information under
4-3