Boot Rom; Memory Limit Of 1 Megabyte; Changing Conﬁguration For Multiple Nics - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

Pci network interface card

Table of Contents

Boot ROM

To use this option, you must have installed the

3C359-TRIROM in the boot ROM socket on the NIC.

(The 3C359-TRIROM must be ordered separately. See

installation instructions in the TriROM user guide.) When

enabled, the NIC allows the system to access BootWare

residing in the TriROM, enabling the PC to boot (with

or without a hard drive) remotely from a LAN server in

TCP/IP, NetWare, and RPL environments. The default setting

is Disabled.

When disabled (set to No Limit), the MMIO address space

can be mapped above the standard conventional memory

address limit of 1 megabyte.

Changing Conﬁguration for Multiple NICs

If you have more than one 3C359 NIC in your PC, you must

select the NIC you want to conﬁgure.

From the DOS Conﬁguration and Diagnostic Program menu

(Figure B-1), press Tab to select the Select pull-down menu.

Select the 3C359 NIC you want to conﬁgure. Continue

with conﬁguration instructions as described earlier in

this appendix.

Changing Conﬁguration for Multiple NICs

B-5

Table of Contents

Do you have a question about the TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card and is the answer not in the manual?

Tokenlink 3c359b Tokenlink velocity xl