Conventions - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

2 A T
BOUT
If you are looking for
Host connectivity configuration procedures for IBM environments
Troubleshooting tips and procedures
Specifications for cabling and connector pin assignments
Instructions about changing configuration settings for the 3C359 NIC
through the DOS Configuration and Diagnostic Program
Technical support information

Conventions

Table 1 and Table 2 list conventions that are used
throughout this guide.
Table 1 Notice Icons
Icon Notice Type
Information note
Caution
Warning
Table 2 Text Conventions
Convention
Syntax
Screen displays
(continued)
G
HIS UIDE
Description
Important features or instructions
Information to alert you to potential damage to a
program, system, or device
Information to alert you to potential personal injury
Description
The word "syntax" means you must evaluate the syntax
provided and supply the appropriate values. Placeholders
for values you must supply appear in angle brackets.
Example:
Enable RIPIP by using the following syntax:
SETDefault !<port> -RIPIP CONTrol =
Listen
In this example, you must supply a port number for
<port>.
This typeface represents information as it appears on
the screen.
Turn to
Chapter 5
Chapter 6
Appendix A
Appendix B
Appendix C