Installing A Driver For Windows Nt 3.51 - 3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface Card User Manual

Installing a 3C359 NIC Driver for Windows Environments
This path identifies the location of the NDIS 4 driver files
for Windows NT 4.0. The Select OEM Option dialog
box appears.
8 Select 3Com TokenLink Velocity XL PCI Adapter and
click OK.
9 Verify that 3Com TokenLink Velocity XL PCI Adapter
appears in the list in the Network Adapters tab and
click Close.
If your network environment uses the TCP/IP communications
protocol, the Microsoft TCP/IP Properties dialog box is
displayed. You must obtain from your network administrator
all the information you need to define an IP address during
the installation process. Continue after you have defined the
NIC for TCP/IP.
Bindings messages appear, followed by a prompt to restart
the computer.
10 Remove the TokenDisk diskette or CD from the drive.
11 Click Yes to restart the computer.
This concludes the procedure for installing the NDIS 4
driver for Windows NT 4.0.
To disable auto ring speed detection and manually select the
ring speed, see "Setting Ring Speed for Windows NT 4.0" for
more details.
To define a locally administered network address, see
"Defining the LAA Address for Windows NT" for
more details.
To select applications for high-priority network access, see
"Configuring Class of Service" for more details.

Installing a Driver for Windows NT 3.51

Follow these steps to install the NDIS 3 driver for
Windows NT 3.51.
1 If you are using the 3.5-inch diskettes, insert
TokenDisk diskette #2 in the drive. If you are using
the TokenDisk CD, insert it in the CD-ROM drive.
2 In the Main group, double-click the Control Panel icon.
4-7