Table of Contents
Advertisement
REAR SHOCK ABSORBER HIGH COMPRESSION
DAMPING FORCE ADJUSTMENT
3 - 40
EC36d000
REAR SHOCK ABSORBER HIGH
COMPRESSION DAMPING FORCE
ADJUSTMENT
1. Adjust:
High compression damping force
G
By turning the adjuster 1.
Stiffer a → Increase the high compres-
sion damping force. (Turn the adjuster
1 in.)
Softer b → Decrease the high compres-
sion damping force. (Turn the adjuster
1 out.)
Extent of adjustment
Maximum
Fully turned in
position
STANDARD POSITION:
G
This is the position which is back by the spe-
cific number of turns from the fully turned-in
position. (Which align the punch mark a on
the adjuster with the punch mark b on the
adjuster body.)
Standard position:
About 1-1/8 turns out
* About 1-1/4 turns out
* For EUROPE
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
INSP
ADJ
Minimum
2 turns out
(from maximum
position)
- Quick Links:
- Engine
Hide quick links:
Advertisement
Table of Contents
