Communication Mode Status - Sony Ipela PCS-XG55 Integration Manual

3-4-2. Communication Mode Status

1. With regard to how to access the Machine Status, refer to Section 3-4-4.
2. Use the button on the Remote Commander to select "Communication Mode Status", and then press
the [ENTER] button.
"Communication mode" menu is displayed.
6 5 4
7 8 9
The items below are shown both in the columns for "(Encode)" and "(Decode)". The descriptions under
"(Encode)" show the setting status of the local system and those under "(Decode)" show the status of the
receiving.
1 Far End Terminal Name: Displays the terminal name of a remote party.
2 Remote Address:
3 Audio Mode:
4 Video Mode:
n
The audio encoding and video encoding formats used for communication with a remote party may
differ from the settings in this menu, depending on the status of the system on the remote site.
5 Frame Rate:
6 Rate:
7 Line I/F:
8 Camera Control:
9 H239:
3-14
3 2 1
Displays the address of a remote party.
Displays the current audio encoding format.
Displays the current video encoding format.
Displays the maximum frame rate of motion pictures.
Displays in real time the number of connected lines and their transfer rates.
Displays the line interface being used.
Displays whether the unit is ready to operate both cameras.
Displays whether the unit is ready to use the H.239 presentation mode.
PCS-XG80