Pcs-Xg Series Models Connection Using Sip - Sony Ipela PCS-XG55 Integration Manual

m
. When connecting your system via a SIP, use the
the connector in PCS-XG55/XG55S. Connection to a SIP server through the
is not available.
. The REC OUT jack is used to make an audio recording of a communication. This is not used during
regular communication.
. In this connection, the two microphones PCS-A1 are displayed, but two PCS-A1s are supplied only
with PCS-XG80. PCS-XG55 includes one PCS-A1, and PCS-XG80S/XG55S includes no PCS-A1.

1-2-2. PCS-XG Series Models Connection Using SIP

The SIP function of the PCS-XG80/XG80S/XG55/XG55S is not regarded as optional software (PCSA-
SP1) but is supported as a standard function.
1 (LAN1) connector on PCS-XG80/XG80S or
for the SIP function of this equipment. Note that 720 60fps/1080i mode is not supported. The maximum
resolution is 720/30fps and the maximum bit rate of the SIP connection is 4 Mbps.
The SIP function of PCS-XG80/XG80S/XG55/XG55S compared to the existing optional software (PC-
SA-SP1) is shown as below.
Multi server support
Multi call id support
P2P AV communication
NEC SIP Telephone terminal
support
Internal MCU
Encryption
QoS (ARQ, ARC, FEC)
FECC
Presentation
Annotation
IPv6 Support
PCS-XG80
1 (LAN1) connector in PCS-XG80/XG80S and use
(LAN) connector on PCS-XG55/XG55S is used
PCSA-SP1
Up to 4
Up to 6
All AV Codec
Supported
Supported
Supported
Supported
Supported
Supported
N/A
N/A
2 (LAN2) connector
PCS-XG80/XG80S/XG55/XG55S
1
1
AAC-LC not supported
N/A
N/A
N/A
N/A
Supported
N/A
N/A
Supported
1-27