Sony Ipela PCS-XG55 Integration Manual page 21

Reversed MIC inputs function
This function allows you to select whether to transmit the audio input from the microphone with right and
left reversed to a remote party. Due to the reversed audio, participants at the remote site can match the
right and left of the camera image and the audio.
n
To reverse the audio, set "Reversed MIC Inputs" of "Audio 2" in the Audio Setup Menu to "On". (The
initial setting is "Off ".)
You cannot use reversed audio with AUDIO 1 IN/AUDIO 2 IN (PCS-XG80 main unit), or AUDIO IN
(PCS-XG55 main unit) when these inputs are used for AUX, but it can be used with AUDIO 1 IN/AUDIO
2 IN when these inputs are used for MIC. For details on the MIC and AUX settings, refer to "2-2-2 Other
Setup: To set up audio input and echo canceller".
Right and left can be reversed (Setting of "Audio Input" = MIC)
R
R L
R
Loud Speaker
L R
Sender side
Receiver side
L R
Loud Speaker
L
n For PCS-XG55 main unit, AUDIO 1 IN connector is not equipped and AUDIO 2 IN connector
is named to AUDIO IN connector.
PCS-XG80
A B
Camera
PCS-XG Series
Reversed
main unit
Transmitting
PCS-XG Series main unit
Monitor
A B
MIC (A1/A3),
L
AUDIO 1 IN, AUDIO 2 IN
L
Loud Speaker
Loud Speaker
R
1-17