1-2-7. Multipoint Connection (Screen Display)
(Main terminal: PCS-XG80/XG80S only)
n
PCS-XG55/XG55S is available only as a sub-terminal.
When a multipoint connection is established, the video displayed on each terminal will be as shown
below.
The total bandwidth of the main terminal is automatically limited to 7 Mbps when all of the following
conditions are true.
. Five sub-terminals are connected to the main terminal of the MCU.
. All terminals are PCS-XG80/XG55. The main terminal is PCS-XG80.
. "Packet Resend Request (ARQ)" is set to "On".
Basic connection (PCS-XG80/XG55 only over IP connection, CP mode)
512 x 288 WCIF
1280 x 720 HD
720HD
The largest of the six split windows is that corresponding to the speaker, selected by voice detection.
PCS-XG80
(Main terminal: PCS-XG80 only)
10 Mbps
2 Mbps
2 Mbps
720HD
720HD
720HD
Main terminal
2 Mbps
2 Mbps
2 Mbps
720HD
Sub-terminal
720HD
1-33