Table of Contents
Advertisement
Telephone Operation
Headset Mode
Feature Code to enable: Feature
9#
Feature Code to disable: Feature
*9#
Description
The Headset feature allows the user to toggle between speaker mode and headset mode. Press the
speaker button once, from an idle telephone, to activate the headset, press it again to activate the
Feature
speaker mode. Once enabled, the disable code
*9# must be dialed to deactivate
headset mode. If Feature 9# is programmed on a button, it will toggle the feature on and off.
Default Settings:
Headset mode is disabled by default
Operation
Feature
Feature
1. From an Idle extension dial
9# to enable headset mode or
*9#
to disable headset mode.
Operational Notes
N/A
Hidden Codes (Dial Pad)
Feature Code: Feature
61
Description
A four-digit intercom code may be stored for dialing by one-button operation. The Hidden Code
also called Dial Pad feature must be programmed on a Flexible (Feature/DSS) button or it will not
operate. This feature, simulates a user dialing the 4 digits, and can be used to store 4 digit codes,
such as an account code or a voice mail password. For example, to use the hidden code feature,
you may press your voice mail button, or dial Feature 64 to call the voice mail system. When
the system answers, press the Hidden Code Feature Button to enter the 4 digit password.
Default Settings:
N/A
XBLUE Networks
64
Advertisement
Table of Contents
