Table of Contents
Advertisement
Telephone Operation
Placing a CO Line call can be done in several ways:
•
CO Line Button
•
CO Line Group Access Code
•
CO Line Group Button
•
Speed Dial
When you are using an intercom or CO line the associated lamp will light green and flash at a
double wink rate at your telephone. This LED condition is referred to as I-Use Indication (the
indication that you are using this CO Line.) DSS/BLF Lamps for the same CO Line that you are
using will light steady at all other digital speakerphones.
Calls placed on CO Lines are checked against the CO line's and extensions' Class of Service (COS).
Each call placed is verified against the toll restriction tables, which are used to create the
extension's class of service. If the dialed number is allowed, the call will be placed, otherwise the
call will be denied.
Default Settings:
All calls are allowed at all extensions
Operation
To access a CO Line:
•
Dial 9 to access CO Lines in line group 1
•
Press the CO Line button
•
Dial the directory number of the desired CO line 700-719, 744-747
•
Dial a Speed Dial location (
Operational Notes
•
If a CO Line is busy when the access attempt is made, busy tone is heard. Digital Speaker-
phone have the option to press the
available, the extension is alerted by a special ring tone, and the CO line is reserved for that
extension. Press the
•
Busy CO Lines may be queued for use.
CO Line Queuing /Call Back
Feature Code: N/A
Description
CO Line Queuing allows a user to request use of a busy CO line. When the CO Line goes idle
(current user hangs up), that CO Line rings the user that queued the line. While the line is ringing
40
500
549
600
-
or
cbck
(call back) feature. When the CO line becomes
Reply
interactive button to access the line.
(See "CO Line Queuing /Call Back" Page
XBLUE Networks
699
-
) that has a stored telephone number.
40)
Advertisement
Table of Contents
