Hands-Free Calling; Handset/Headset Volume Control; Hand-Free Calling - Xblue Networks x16 Installation Manual

X16 Installation Guide
Programming Feature Buttons
Each digital telephone endpoints has twelve (12) programmable feature
buttons, which can be customized by each extension user. There are
three programmable feature button categories.
Selections Description
DSS/BLF Key Direct Station Select (DSS) – allows extension users
to press one button to dial another extension. In
addition, the DSS button doubles as Busy Lamp
(LED) Field (BLF). The BLF shows the status, idle or
busy, of other extensions.
SPD Key Each of the twelve (12) buttons can be programmed
as a speed dial key. Input the number to be dialed
once the key is identified as a speed key. Simply
press the speed key to dial the number once it is
programmed. "
shown as a P.
Feature Key Feature + 1 = Record
Feature + 2 = Open
Feature + 3 = Flash Key
Feature + 4 = DND
Feature + 5 = Mute
Feature + 6 = Conference
Feature + 7 = Pause
Feature + 8 = Redial
Feature + 9 = Headset
Feature + 0 = All Page
Feature + * = Open
Feature + # = Open
- 44 -
Feature
+ 7" will enter a pause,
Issue 2
2) If an ancillary device (single line before the system) is on a CO Line,
and the system does not detect that line as being busy, the system
will forward the call, and dial over the call.
3) This feature is considered disabled if no number is entered in the
"FWD Phone Number" field.
4) At default the "External" transfer will release after 3 minutes. Use
the following codes to extend the length of the call
a. *1 – Extends the call by 1 Minute
b. *2 – Extends the call by 2 Minutes
c. *3 – Extends the call by 3 Minutes
d. *4 – Extends the call by 4 Minutes
e. *5 – Extends the call by 5 Minutes
f. *6 – Extends the call by 6 Minutes
g. *7 – Extends the call by 7 Minutes
h. *8 – Extends the call by 8 Minutes
i. *9 – Extends the call by 9 Minutes
j. ** – Extends the call by 20 Minutes
k. *# – Extends the call by 30 Minutes
l. *0 – Disconnects both lines immediately
Note:
This type of forwarding may result in a per call usage and toll charge for each forwarded
call. Any and all toll charges are the sole responsibility of the user of the installed
equipment; XBLUE offers no warranty or will assume any responsibility for any toll charges.

Hands-Free Calling

Calls between extensions are answered hands-free. This allows extension users
to answer and converse without pressing the speaker button or lifting the
handset. If "Auto Mute" is enabled the called party will be able to hear the calling
party, but they will not be able to converse without pressing the mute button or
going off hook on the handset. There will be one, 1 second tone when an
extension calls another extension. At default, Auto Mute is disabled (off).

Handset/Headset Volume Control

The volume of the handset and headset can be adjusted to compensate for
hearing levels. Press the volume + to increase or the volume- to decrease the
volume of the active status of the endpoint. For example, while speaking on the
handset, the volume keys will adjust the handset volume.
Issue 2 - 29 -