Table of Contents
Advertisement
5. The Attendant select "one" for one time, and "always" for every day at the same time. The
display will update:
Setup Analog (SLT) Telephone Alarm Clock (Wake up)
1. Dial
#92
on SLT telephones.
2. Enter the desired alarm/wake up time in 24 hour format:
3. Dial 1 for one time, and 2 for "always" every day at the same time.
Operational Notes
•
The Alarm plays every day, if always is selected.
•
SMDR Does not record the alarms
•
On a digital telephone, the alarm plays even if it is busy.
•
The Alarm Rings in the extension's distinctive tone.
•
The Alarm must be set at least 1 minute in advance of the current time.
•
An Analog telephone receives dial tone when going off-hook
•
An Analog Telephone will not ring, or receive notification, if it is busy (Off-Hook) when the
Alarm time has been reached.
Alarm Key
Feature Code: N/A
Default Settings:
No Alarm key is set
Operation
Setup Alarm Key
The alarm key is designed for diagnostic purposes and has no practical application.
Operational Notes
•
The Alarm Key must be programmed on a Flexible Button.
•
Alarms are reported by a flashing light, and updates in the display.
REMINDER:
one
always
XBLUE Networks
Telephone Operation
9
Advertisement
Table of Contents
