Telephone Operation
Operational Notes
•
If you press the softkey beneath
cancelled and the display will show:
•
To activate a Call Back at an extension that is in the Voice Announce (Hands free) mode, you
must first Force Tone Ring (*).
•
If the call back is not answered during the reply alert ringing, the response message will be
displayed until you press either the softkey beneath
•
The call back process begins when both your extension and the called party's extension are in
idle.
Call Forward (Extension)
Feature Code:
Feature
Digital Speakerphone:
Single Line Telephone
Analog Call Forward codes
TABLE 1.6
Forward Type
Entry
#21
Busy
#22
Direct
#23
Follow from
#24
No Answer
#25
Follow to
Dest = Destination - Enter a valid Extension or UCD Group, for 253 for voice mail
CO/ICM = Type of calls to be forwarded. 1=CO only, 2=Both CO and Intercom, 3=Intercom
only.
t = Time = After this time expires calls will be fowarded to the new destination.
frmpswd = Extension password where calls are forwarded from
26
del
during the Call Back Alert ringing, the Call Back will be
back next chg
2
+ (Dest) + (CO/ICM)
+ (Dest) + (CO/ICM)
+ (CO/ICM) + (frmpswd)
+ (Dest) + (CO/ICM) + t
+ (CO/ICM)
XBLUE Networks
reply
, or the softkey beneath
Disable
#*21
#*22
#*23
+ (Dest) + (frmpswd)
#*24
#*25
del
.