Telephone Operation
Forced Intercom Tone Ring
Feature Code:
*
Description
Extension users can use the Forced Intercom Tone Ring feature to cause the called Extension to
ring when initiating an intercom call. After a Voice Announce connection has been established, the
calling party may convert the alert signal at that extension from Voice Announce to Tone Ring.
Additionally, extensions that are programmed to Tone Ring, can be converted to Privacy Mode using
this same technique.
Default Settings:
N/A
Operation
1. Establish an intercom call to an extension in "Voice Announce" (
calling parties telephone will display:
2. Press * to change the alert signal at the called extension from Voice Announce to Tone
Ring. The calling parties telephone will display:
3. A Tone Ring alert signal is sent and continues at the called extension until it is answered or
the call is forwarded to the preprogrammed destination. Prior to forwarding, the calling
party can dial * again to return to Voice Call Announce mode.
62
XBLUE Networks
Feature
98) mode. The