Hold (Power); Programmable Feature Buttons; Volume; Headset Jack - Xblue Networks PCS digital User Manual

2.4 gig wireless handset

Hide thumbs Also See for PCS digital:

Table of Contents

Hold (Power)

The Hold Button is used to place Intercom and Central Office telephone calls on hold.

Additionally, pressing the hold button for three (3) seconds will power the handset on and

off.

The Programmable Feature Buttons, with red LED's, can be programmed with a desired

feature/function including Central Office Lines, Intercom, and Extension Features such as

Call Forward, Do-Not-Disturb, etc. To program a feature/function button:

1) Press f [#] + [3]

2) Press the button to be programmed

3) Select the desired feature using the soft buttons

(Left Side)

The volume bar is used to increase or decrease the receiver, ringer, speaker and headset

volumes.

(Left Side)

The headset becomes active when it is plugged in. However, for proper operation the

feature code f [9] + [#] may be required. When a headset is plugged into the

handset, the speakerphone becomes disabled.

Volume Bar

(Right Side)

The Speaker Button is used to active the Speakerphone on an idle or busy handset

Wireless Key Telephone Handset

Headset Jack

2.55 mm

Speaker Button

- 8 -

Table of Contents