Table of Contents
Advertisement
Telephone Operation
Release Key
Feature Code: Feature
52
Description
The Release Key, sometimes called a Clear key is used to cancel or complete any current action,
bring it back to idle, without hanging up the handset.
Default Settings:
No Release Key is programmed on the telephone Feature/DSS Buttons.
Operation
N/A
Operational Notes
•
Release Key must be programmed on a Feature/DSS Button to operate.
•
Release Key will disconnect calls in progress.
Room Status (Hotel/Motel Feature)
Feature Code: Feature
7#
Description
The System comes equipped with basic hotel/motel features. Once enabled, the Attendant or
Alternate Attendant can dial the feature code and update the Room's Status; Check In, Check Out,
and Clean. The LED associated with the flexible buttons on a DSS Console will change color to
indicate the current status of each room. A room that is "Checked In" will not light the LED. When
the room is "Checked Out" the LED is lit, and flash slowly. When the room status is updated to
"Clean" the LED will be lit solid green. This visual indication is only available on a DSS Console.
NOTE: Before any extension is able to make a CO Line call that extension, even administrative
extensions, must be checked In.
Default Settings:
The Hotel/Motel feature is disabled
All extensions are checked out.
98
XBLUE Networks
Advertisement
Table of Contents
