Xblue Networks Xplus100 User Manual page 76

Telephone Operation
Tone Ring Mode
When an extension, in tone ring mode is called, it will ring at the intercom ring cadence as defined
by the Distinctive ring setting.
to answer the ringing call by pressing the speaker button or lifting the handset.
: Extension behavior in these mode
TABLE 1.9
Momentary
Mode Confirmation
Voice Announce – VA-HF MODE
Handsfree
Voice Announce – VA-PRIVACYMODE
Private
Tone Ring Mode TONE RING MODE
Default Settings:
All Digital Speakerphones that are set to Voice Announce – Hands-free mode.
Operation
Setup
1. While the extension is idle, press
display indicates the new mode set:
72
See "Distinctive Rining Extension" Page
Confirmation
Tone Heard Status Bar (when intercom call rec'd)
single burst tone The status bar and speaker button are lit solid.
single burst tone The status bar, speaker button and Mute buttons are
lit solid .
Intercom ring The status bar and speaker button are both flashing.
cadence is heard
Feature
98. A confirmation tone is heard and the
XBLUE Networks
47. The called party will have