Hold - Xblue Networks Xplus100 User Manual

Telephone Operation
Operational Notes
• The Hidden Code feature can only be used when stored on a Flexible (Feature/DSS) button.

Hold

System Hold:
Feature Code to enable:
Exclusive Hold:
Feature Code to enable: Feature
Description
Intercom and CO Lines calls can be placed on either system or exclusive hold. When you press the
Hold button, to place a call on hold, it will be placed on system hold. When you press the Feature
key and then the hold button the call will be placed exclusive hold.
Calls on system hold are available to all other extensions within the system whereas calls placed on
exclusive hold are only be availabe to the extension that placed the call on exclusive hold. Some
features, such as conference automatically use exclusive hold.
Calls placed on either system or exclusive hold will recall after the recall timer expires. Once a call
recalls, it is no longer considered "Exclusive", therefore, any extension within the system can
answer the recalling line.
Default Settings:
N/A
Operation
1. While on an intercom or CO Line call.
System Hold:
2. Press the h button to place the call on system hold.
3. Press the h button again to pick up the same call at the same extension.
4. Other extensions within the system can press the flashing CO Line or Intercom button to
pick up the held call.
Exclusive Hold:
2. Press the Feature and then the h button to place the call on exclusive hold.
66
h
h
XBLUE Networks