Table of Contents
Advertisement
Feature
2. Press
98 again to advance through each of the available modes.
Receiving a Call in VA-HF Mode:
1. When your extension is idle, you will be alerted of an intercom call by one tone burst. The
voice connection is then established immediately and and you may converse via the
speakerphone.
Receiving a Call in VA-Privacy Mode:
1. When your extension is idle, you will be alerted of an intercom call by one tone burst. The
voice connection is then established immediately, but the Mute function activated. The
Called party can hear the calling extensions' voice announcement over the speaker, but the
microphone in telephone is temporarily disabled.
2. The called extension user can:
a. Lift the handset for privacy.
mute
b. Press the
party over the speakerphone.
Receiving a Call in Tone Mode:
1. When your extension is idle, you will be alerted of an intercom call by a double-burst tone
which is repeated until you respond or until the call follows a Call Forward route.
2. If you dial an extension that is in "Tone Ring" mode and you press the "*" key the called
extension switches from "Tone Ring" Mode to Voice Announce Privacy mode. The called
party then follows the VA-Privacy Mode Parameters.
3. The extension user can:
a. Press the speaker button or Lift the handset for privacy.
Operational Notes
•
During Tone Ring, the LED associated with the
•
If a DSS button has been programmed with the Intercom Mode Selection Code (
98) the LED associated to that button will indicate the current mode selection as follows:
•
Voice Announce – Hands-free, LED will light steady green.
button to deactivate the "Mute" feature and speak with the calling
XBLUE Networks
m
button will flash.
Telephone Operation
Feature
!
73
Advertisement
Table of Contents
