Table of Contents
Advertisement
Telephone Operation
Operation
Setup Auto Hold:
Feature
1. Press
94.
2. A confirmation tone is heard and the display shows:
3. The extension returns to an idle state.
Enable Auto Hold:
4. While connected to an intercom or outside line call, press another outside line button, if
programmed.
5. The current connection is placed on hold and the next connection is established.
Cancel:
Feature
1. Press
*94 A confirmation tone is heard and the display shows:
2. The extension returns to an idle state.
Operational Notes:
•
The Feature Code
Speakerphone. To enable/disable the feature, toggle the Feature/DSS Button.
•
If you access an idle line and skip to another line before dialing, the first line will not be auto-
matically placed on Hold. (A line must be connected with an active call; either you dialed a
number or answered a ringing line.)
•
Auto Hold places a call on Exclusive Hold.
•
If you have the Auto Hold feature programmed on a Feature/DSS Button, the Feature/DSS
Button LED will light when the feature is enabled.
16
AUTO HOLD ALLOW
AUTO HOLD DENY
Feature
94 can be programmed under a flexible button on a Digital
XBLUE Networks
Advertisement
Table of Contents
