Telephone Operation
When that extension is in Do-Not-Disturb (DND), the LED will flash
Page
48). This same button is used as a one-button Direct Station Selection (DSS) call button for
quick transfer of calls or intercom calling.
Also
See "Flexible (Feature) button inquiry and programming" Page 57
Default Settings:
N/A
Operation
To program
Feature
1. Press
#3.
2. Press the Feature/DSS button that is to be programmed. The current function displays.
3. With in three seconds, press the softkey beneath
4. Select the softkey beneath
5. Enter the directory number of the extension that is to be programmed on this feature
button and press the softkey beneath
Speaker
6. Press the
To use:
1. Press the programmed button to call an extension.
2. Speak hands free or lift the handset to talk privately.
3. Hang up when the conversation is completed.
Operational Notes
•
DSS/BLF buttons may be assigned to any of the Flexible (Programmable Feature) buttons.
•
Extensions in DND mode will cause the LED associated to that extension to flash.
•
Extensions that are using their handset and off-hook will cause the LED associated to that
extension to light steady.
•
Most features, when programmed on a flexible button, will act as a toggle on/toggle off; even
if they have different enable and disable codes.
•
The DSS function can be used to transfer calls to other extensions or directly to a specific
voice mailbox if the voice mail button is pressed first.
•
Each Digital Speakerphone has a default feature button mapping.
20
dir
via the LCD interactive button.
save
button twice to exit programming and return to idle condition.
XBLUE Networks
(See "Do Not Disturb (DND)"
chg
to change the function.
.