Xblue Networks Xplus100 User Manual page 16

Telephone Operation
Attendant Administration Mode
TABLE 1.3
System Mode Description
CFW Auxi Lamp At the top of each speakerphone is a Vivid Light auxiliary light bar, which illuminates dif-
ferently depending on the "state of the telephone". For example, once the user forwards
their calls to another destination, the AUXI Lamp will be lit solid. This setting will turn off
the lamp.
Shut down VM It is a good idea to shutdown the voice mail system, before powering the voice server
down.
Default Settings:
N/A
Operation
1. Any Digital Speakerphone may enter the Administrative Code
2. Enter the Tenant Group number to be Administered. (Valid Groups are 1, 2, and 3)
3. Press the softkey beneath
4. Enter the password for this Tenant Group Attendant (default for the Tenant Group 1
Attendant is 9999).
5. Press the softkey beneath
displays.
6. Press the softkey beneath
softkey beneath
To change Service Mode:
1. Press the softkey beneath
2. Press the softkey beneath
Noon, or Time
• Time mode automatically puts the system into Day or Night mode, based on the programmed
timed schedule found in database programming (Time Switching).
• Day Mode is when it is not night, as defined in Time Switching.
• Night Mode is all other times, not defined as day mode in Time Switching
12
See "Auxiliary Lamp / LED Status Bar" Page 18
save .
show . The first Administrative item (
SVC MODE CHANGE
back next chg
next to move to the next Administrative item or press the
show to show the current service mode (
show
chg to toggle and set the service mode. Options are Day, Night,
XBLUE Networks
Feature
#0
.
SVC MODE CHANGE
DAY/ALT/EVE/TIME
)
).