Installing Patches - HP 6125G Configuration Manual

..
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait.....
TFTP:
File downloaded successfully.
# Download new-config.cfg to the subordinate switch.
<IRF> tftp 2.2.2.2 get new-config.cfg slot2#flash:/new-config.cfg
# Download soft-version2.bin from the TFTP server to both member switches.
<IRF> tftp 2.2.2.2 get soft-version2.bin
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait............
TFTP: 10058752 bytes received in 141 second(s)
File downloaded successfully.
<IRF> tftp 2.2.2.2 get soft-version2.bin slot2#flash:/soft-version2.bin
# Specify new-config.cfg as the next-startup configuration file for all IRF members.
<IRF> startup saved-configuration new-config.cfg main
Please wait ...
Setting the master board ...
... Done!
Setting the slave board ...
Slot 2:
Set next configuration file successfully
# Specify soft-version2.bin as the startup system software image for all IRF members.
<IRF> boot-loader file soft-version2.bin slot all main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
1!
The specified file will be used as the main boot file at the next reboot on slot
2!
# Reboot the IRF fabric to complete the upgrade.
<IRF> reboot
Use the display version command to verify the upgrade. (Details not shown.)
3.

Installing patches

Network requirements
Download a patch package file from a TFTP server to fix the bug in the IRF fabric in Figure 42. The TFTP
server and the IRF fabric can reach each other.
917 bytes received in 1 second(s)
104