Restoring The Next-Startup Configuration File From A Tftp Server; Displaying And Maintaining A Configuration File - HP 6125G Configuration Manual

You can delete the main, the backup, or both. If the main and backup next-startup configuration files are
the same file, the system sets the attribute of the configuration file to NULL instead of deleting the file. You
can permanently delete the file after its attribute changes to NULL.
You may need to delete the next-startup configuration file for one of the following reasons:
After you upgrade system software, the file does not match the new system software.
•
The file has been corrupted or is not fully compatible with the device.
•
After the file is deleted, the device uses factory defaults at the next startup.
Perform the following task in user view:
Task
Delete the next-startup
configuration file.
Restoring the next-startup configuration file from a
TFTP server
To download a configuration file from a TFTP server to the root directory of each member' storage
medium, and specify the file as the next-startup configuration file, perform the task in this section.
This task restores only the main next-startup configuration file.
Before restoring the next-startup configuration file, make sure the server is reachable, the server is
enabled with TFTP service, and you have read and write permissions.
To restore the next-startup configuration file from a TFTP server:
Step
1. Restore the main next-startup
configuration file from a TFTP
server in user view.
2. Verify that the specified
configuration file has been set
as the main next-startup
configuration file.

Displaying and maintaining a configuration file

Task
Display information about
configuration rollback.
Command
reset saved-configuration [ backup | main ]
Command
restore startup-configuration
from src-addr src-filename
display startup
Command
display archive configuration [ |
{ begin | exclude | include }
regular-expression ]
98
Remarks
Available in user view.
Optional.
Remarks
Available in any view.