Configuring None Authentication For Telnet Login - HP 6125G Configuration Manual

username or password configured on a remote server was lost, contact the server administrator for
help.
Table 14 Configuration required for different Telnet login authentication modes
Authentication
mode
None
Password
AAA

Configuring none authentication for Telnet login

Step
Enter system view.
1.
2. Enable Telnet server.
3. Enter one or multiple
VTY user interface
views.
4. Enable the none
authentication mode.
5. Configure the
command level for
login users on the
current user
interfaces.
6. Configure common
settings for the VTY
user interfaces.
Configuration tasks
Set the authentication mode to none for the VTY user
interface.
Enable password authentication on the VTY user
interface.
Set a password.
Enable scheme authentication on the VTY user interface.
Configure local or remote authentication settings.
To configure local authentication:
1. Configure a local user and specify the password.
2. Configure the device to use local authentication.
To configure remote authentication:
3. Configure the RADIUS or HWTACACS scheme on
the device.
4. Configure the username and password on the AAA
server.
5. Configure the device to use the scheme for user
authentication.
Command
system-view
telnet server enable
user-interface vty first-number
[ last-number ]
authentication-mode none
user privilege level level
See "Configuring common settings for
VTY user interfaces
Remarks
N/A
By default, the Telnet server is disabled.
N/A
By default, authentication mode for
VTY user interfaces is password.
By default, the default command level
is 0 for VTY user interfaces.
Optional.
(optional)."
33
Reference
"Configuring none
authentication for Telnet
login"
"Configuring password
authentication for Telnet
login"
"Configuring scheme
authentication for Telnet
login"