# Create a local user named usera, set the password to 123, specify the Web service type, and
specify the user privilege level 3. A level-3 user can perform all operations supported by the
device.
[Device] local-user usera
[Device-luser-usera] password simple 123
[Device-luser-usera] service-type web
[Device-luser-usera] authorization-attribute level 3
Configure the host (HTTPS client):
2.
On the host, run the IE browser, and then enter http://10.1.2.2/certsrv in the address bar and
request a certificate for the host as prompted.
Verify the configuration:
3.
Enter https://10.1.1.1 in the address bar, and select the certificate issued by new-ca. When the
Web login page of the device appears, enter the username usera and password 123 to log in to
the Web management page.
For more information about PKI configuration commands, SSL configuration commands, and the
public-key local create rsa command, see Security Command Reference.
61