Nms Login Example; Network Requirements; Configuration Procedure - HP 6125G Configuration Manual

NMS login example

Network requirements

Configure the device and the NMS so you can remotely manage the device through SNMPv3.
Figure 31 Network diagram

Configuration procedure

Configure the device:
1.
# Assign an IP address to the device. Make sure the device and the NMS can reach each other.
(Details not shown.)
# Enter system view.
<Sysname> system-view
# Enable the SNMP agent.
[Sysname] snmp-agent
# Configure an SNMP group.
[Sysname] snmp-agent group v3 managev3group
# Add a user to the SNMP group.
[Sysname] snmp-agent usm-user v3 managev3user managev3group
Configure the NMS.
2.
Details are not shown. For more information, see the NMS manual.
Make sure the NMS has the same SNMP settings. Otherwise, the device cannot be discovered or
managed by the NMS.
64