Complete Setup; Using Ac Power - Respironics BiPAP autoSV Advanced User Manual

5.4 C S
OMPLETE ETUP
Figure 5–6 shows the completed breathing circuit setup.
Patient Interface
5.5 P D
LUGGING THE EVICE
You can use AC or DC power to operate the device.
WARNING:
Th e DC power option is not intended as a battery backup when using AC power.
WARNING: For proper use, the power supply must be placed feet down, in the upright position, as
shown in Figure 5–7.
5.5.1 U AC P
SING OWER
Complete the following steps to operate the device using AC power:
1. Plug the pronged end of the AC power supply's cord into an electrical outlet.
2. Th e external AC power supply features a cord retainer to provide strain relief for the AC power cord.
Wrap the cord around the AC power supply's cord retainer, using the wire tie supplied with your
power supply.
WARNING: Never plug the AC power supply into an outlet that is controlled by a wall switch.
WARNING: Route the wires to avoid tripping.
Exhalation Port
Circuit
Tubing
Bacteria
Filter
(Optional)
Figure 5–6 Complete Breathing Circuit
I
N
User Manual
Breathing
Circuit
Connection
17