Pressure On/Off Button - Respironics BiPAP autoSV Advanced User Manual

C 4: D
HAPTER
Figure 4–1 shows the location of the device's alarm power indicators, control panel, Pressure On/Off
button, and the breathing circuit connection.
4.1 P O /O B
RESSURE N FF
Th e device's Pressure On/Off
airfl ow.
•
To turn the airfl ow on, press the button in, as shown in Figure 4–2. Th is puts the device in the
Operate state.
•
To turn the airfl ow off , press the button again. Th is puts the device in the Standby state.
Airflow
When the device is in Standby, any ramp in progress is terminated, the alarms are reset (except for the
System Errors alarm), and the humidifi er is turned off .
Th e button is independent of the display screen.
C
EVICE ONTROLS AND
Alarm and Power
Indicators

Pressure On/Off Button

Figure 4–1 Device Front and Top
UTTON
button, located on the side of the device, starts and stops the device's
On
HEAT
Figure 4–2 Pressure Button On/Off Positions
User Manual
D F
ISPLAY EATURES
Control Panel
Breathing Circuit
Connection
Airflow
Off
HEAT
9