Respironics BiPAP autoSV Advanced User Manual page 16

12
Th e information shown on the display screen is defi ned as follows:
Indicates that the device requires user attention as indicated on the screen.
A
Indicates that an apnea alarm has occurred.
Indicates that a breath rate setting is being displayed. Th is symbol fl ashes when the device
BPM
is providing timed backup breaths.
Indicates that a SmartCard is inserted and detected.
cm H O Indicates that the alphanumeric digits are displaying a pressure value.
2
EPAP
Indicates that a maximum EPAP pressure setting is being displayed.
EPAP
Indicates that a minimum EPAP pressure setting is being displayed.
FLEX Indicates that Bi-Flex is turned on and/or its setting is displayed.
Indicates that the humidifi er is turned on and/or its setting is displayed.
Indicates that the Th erapy Hour Meter is being displayed.
LEAK Indicates that the Estimated Leak Rate is being displayed.
Indicates that the control pad LED backlight setting is being displayed or is active.
LPM
Indicates that the value displayed is in liters per minute.
MinVent Indicates that the Estimated Minute Ventilation is being displayed.
ml
Indicates that the value displayed is in milliliters.
Indicates that a Patient Disconnect alarm is active.
Indicates that the maximum Pressure setting is being displayed.
Indicates that the maximum Pressure Support setting is being displayed.
Indicates that the minimum Pressure Support setting is being displayed.
Indicates that the Ramp function is in progress.
Indicates that the Ramp Starting Pressure is being displayed.
RR Indicates that the Respiratory Rate (RR) is being displayed.
Indicates that a rise time setting is being displayed.
Th e small "s" on the right side of the display (above "cm H
s
alphanumeric digits are displaying a time value, in seconds.
V Indicates that the Estimated Exhaled Tidal Volume is being displayed.
TE
User Manual
O") indicates that the
2