Respironics BiPAP autoSV Advanced User Manual page 32

28
7.2 W D W
HAT TO O HEN AN
Th e following example applies to most alarm conditions. Follow these steps unless otherwise directed by
the alarm tables that follow.
1. Look at the alarm indicators and listen to the alarm sound.
Note the color of the LED and whether the LED is solid or fl ashing.
2. Look at the display for text.
Th e symbol appears at the top of the screen to indicate an alarm. Additional codes and symbols
may also appear depending on the type of alarm.
3. Press the button to temporarily silence the alarm (for one minute). Th e display returns to the
SILENCE SILENCE
screen that was showing when the alarm occurred.
4. Look up the alarm in the alarm tables shown in Section 7.3 and perform the action specifi ed.
5. Press the button to clear the alarm.
RESET RESET
A O
LARM CCURS
Figure 7–3 Alarm LED Lights Up
Figure 7–4 Sample Alarm Display
User Manual
Alarm LED
Lights Up