Respironics BiPAP autoSV Advanced User Manual page 37

Problem
Th e mask feels Th is could be due to improper
uncomfortable headgear adjustment or
to wear. improper mask fi tting.
Runny nose. Nasal reaction to the air fl ow.
Th e device's Th e device or power supply has
display is erratic. been dropped or mishandled, or
the device or power supply is in
an area with high EMI
emissions.
A SmartCard Th e SmartCard is not inserted
error occurs. properly. It may be inserted
upside down or backwards.
Why It Happened
User Manual
What To Do
Check the headgear adjustment as described
in the headgear instructions.
Refer to your mask instructions to make
sure the mask is properly fi tted. If the
problem continues, contact your health care
professional for a refi tting or a diff erent size
mask.
Call your health care professional.
Unplug the device and the power supply.
Relocate the device to an area with lower
EMI emissions.
Remove the SmartCard and reinsert it so that
the printed side of the card is facing up and
the end with the arrow goes into the device
fi rst.
If the error message appears again, contact
your health care professional or Respironics
for directions on having your device serviced.
Please have your serial number ready when
you call.
33