Respironics BiPAP autoSV Advanced User Manual page 36

32
Problem
Redness occurs Th is could be due to
when the mask improper mask fi tting or
cushion comes in improper mask cleaning.
contact with the skin.
Redness occurs Irritation or allergic reaction to
when the mask the mask material.
cushion accessory
comes in contact with
the skin.
Sore or dry eyes. Th e mask may not be positioned
correctly, or the mask is not
properly fi tted.
Th ere are unexplained Th e device or power supply has
changes in the been dropped or mishandled,
performance of or water has been spilled onto
the device. or into the device or the power
supply.
A patient Th e tubing has become
disconnect alarm disconnected from the system.
occurs.
Why It Happened
User Manual
What To Do
Be sure to rinse the mask thoroughly
after cleaning to remove residue. See the
mask cleaning instructions for detailed
information. If the problem continues,
contact your health care professional for a
refi tting or a diff erent size mask.
Use a barrier between your skin and the
mask, such as 3M's Microfoam
®
Duoderm . Refer to your mask instructions
for additional information.
Check the headgear adjustment as described
in the headgear instructions. Refer to your
mask instructions to make sure the mask is
properly fi tted.
If the problem continues, contact your health
care professional for a refi tting or a diff erent
size mask.
Discontinue use.
Contact your health care professional or
Respironics for directions on how to have
your device serviced. Please have the serial
number ready when you call.
RESET RESET
Press the button to reset the alarm.
Reconnect the tubing.
If the alarm continues, the device may not be
operating correctly. Contact your health care
professional or Respironics for directions on
having the device serviced. Please have your
serial number ready when you call.
® or Squibb's