Gige Ueye - IDS uEye series User Manual

9.4.2

GigE uEye

Figure 205: GigE uEye SE
The two LEDs indicate the current status of the GigE uEye camera.
· LED 1: camera status
· LED 2: network status
Camera status (LED 1)
Camera is booting
Camera off
Starter firmware ok, waiting for connection
Connecting
Firmware update
Normal operation
Freerun mode
Single trigger mode
Group trigger mode *
Standby mode
Error
Camera hardware error
Configuration error
Starter firmware not ok, failsafe firmware enabled
Overtemperature (>65°C)
© 2009 IDS Imaging Development Systems GmbH
status LEDs
)
Figure 206: GigE uEye
HE status LEDs
9 Specifications
213