Usb Ueye Le - IDS uEye series User Manual

9.2.3

USB uEye LE

Housing Version
Figure 132: USB uEye LE
Lens mount
CS-/S-mount
Differences to the USB uEye SE
The uEye LE features the following differences to the
USB
· Version with housing: CS-mount (C-mount lenses can be connected using the enclosed adapter,
see USB uEye LE Accessories).
Version with housing: No I/O connector.
·
· Board level version: Optional I/O connector with all signals.
Board level version: No opto couplers for the I/Os.
·
· Board level version: Hardware supports triggering on falling edges only.
Board level version: Single color LED (orange) that indicates power-on status.
·
The following sensor/lens combinations are available:
UI-122xLE-C
UI-122xLE-M
UI-154xLE-M
UI-164xLE-C
UI-155xLE-C
UI-146xLE-C
UI-148xLE-C
© 2009 IDS Imaging Development Systems GmbH
Enclosure protection class
IP30 (with housing)
For the dimensions of the USB uEye LE accessories, please refer to the USB uEye LE
Accessories chapter.
CS-mount
with housing:
UI-1xx5LE-x
ü
ü
ü
ü
ü
ü
ü
Weight
32 g (with housing)
12 g (S-mount)
8 g (PCB only)
uEye SE models:
USB
S-mount S-mount
M12:
UI-1xx6LE-x UI-1xx7LE-x
ü
ü
ü
ü
ü
ü
ü
9 Specifications
without housing
M14: without lens holder:
UI-1xx8LE-x
ü
ü
ü ü
ü
ü
ü ü
ü ü
165